Home · Services · Entry Door Replacement: Frames, Sidelights, Hardware

Entry door replacement that suits the house and the weather

The front door is the first thing people see and the one you use every day. This page covers door types, sidelights, frames, hardware and sealing, and what a careful replacement looks like from walkthrough to punch list.

Call (954) 331-7392
Home exterior with lush garden landscaping
Design inspiration

More than a door: what an entry is made of

A front entry is an assembly. The slab you see is only one piece, alongside the frame, the threshold, the weatherstripping, the hinges, the lockset and any sidelights or transom glass around it. When the whole assembly is considered together, you get a door that closes with a soft, solid feel and keeps weather outside. When only the slab is changed, old problems in the frame can carry over to the new door.

That is why a replacement conversation starts with questions about the whole opening. Is the frame square and sound? Is the threshold level and sealed? Is the wall around the door dry and in good condition? Each answer shapes the scope, and each one affects how long the finished entry will perform well.

The company handles entries the way it handles every project. There is a walkthrough, a written scope that lists what is and is not included, and a fixed price set against that scope before work begins. If you want to see how entries fit with other openings in a house, the overview of impact windows and doors is a helpful companion to this page.

Before the first visit, spend a few minutes standing at your door and noticing what bothers you. Does it stick in humid weather, rattle in wind, let in light at the edges or feel unsafe? Does the finish look tired from sun? Write these observations down, because they turn a general request for a new door into a specific brief that a contractor can price and plan around.

Choosing a door type for your entry

Entry doors come in a range of constructions, from solid wood to fiberglass to steel and glass assemblies, and each reacts differently to heat, humidity and sun. Wood looks rich but needs finish care in a climate like South Florida. Fiberglass can imitate wood grain and tends to handle moisture well. Steel suits some security priorities but can dent and show finish wear over time.

The style of the door matters just as much as the material. A solid panel door gives privacy. A door with a glass panel lets light into the foyer. A double door makes a grand statement but needs a wider opening and careful hardware choices. Think about how you use the entry, how much light the hall needs, and how the door reads from the street.

Take a look at neighboring homes with similar architecture to get a feel for proportion, but do not copy blindly. The guide to door styles and hardware walks through common looks and what each one asks of the opening, which can help you shape your own preferences before you meet a contractor.

Remember that a door lives in a climate that is hard on finishes. A dark painted slab facing west can get very hot, and some materials respond to that heat by warping or fading. Ask the contractor how the chosen color and material behave in direct sun, and whether a lighter shade or a covered entry changes the recommendation. Practical answers matter more than catalog photos.

Sidelights, transoms and light in the foyer

Sidelights are the narrow glass panels beside a door, and transoms are the glass above. They bring daylight into a hallway that might otherwise feel dark, and they can make a modest entry feel generous. They also add edges, seams and glass that must be sealed and supported properly, so they deserve a closer look during planning.

Ask whether the sidelights are part of the same assembly as the door or whether they are separate pieces. Ask how the glass is held, how the joints are sealed and what privacy options exist, such as textured or frosted glass. If your entry faces strong afternoon sun, think about glass that reduces heat and glare.

If your foyer is dark and you are looking at the bigger picture, remember that entry glass can be one piece of that picture, though it is only one of several choices.

There is a safety dimension to glass near a door as well. Panels placed close to the lock can be a concern for some households, and a thoughtful design considers where the glass sits relative to the handle, what type of glass is used and whether additional hardware makes sense. Raise this early, because it affects which door and sidelight layouts you can comfortably live with.

  • Decide whether you want clear, textured or frosted glass beside the door.
  • Ask how sidelight glass is secured and sealed to the frame.
  • Check how the lock side of the door relates to the nearest glass.
  • Think about window coverings or inside screening for privacy.

Frames, jambs and the condition of the opening

The frame is where the door really lives. If it has twisted, softened with moisture or been chewed by termites, a new slab will not hang correctly. Sometimes the old frame can be kept and sometimes the whole unit comes out. The deciding factor is what is found when the opening is examined closely.

On homes with stucco or block walls, the interface between the frame and the wall finish is a typical weak point. Cracks in the stucco beside a door, stains below the threshold or paint peeling near the jamb can all hint at moisture entering the opening. These are worth pointing out at the walkthrough.

If something is found behind the trim, work on that opening pauses and the issue comes to you as a written change order with a price before it proceeds. You see what was found and decide how to proceed. The guide on change orders explained describes what such a document should contain, and it is worth reading ahead of time.

Ask also how the frame will be fastened to the structure and how gaps between frame and wall are filled and sealed. You do not need to know the technical names for every product, but you do deserve a clear explanation of the steps in plain language.

Hardware, locks and everyday feel

Hardware is the part of the door you touch, and thin hardware shows. A good handle set, deadbolt and hinges feel solid, turn smoothly and line up so the latch engages without fuss. Consider whether you want a keyed entry, a keypad or a smart lock, and ask how any electronic hardware is powered and what happens if the batteries run low.

Finish matters in a salty, humid climate. Some finishes tarnish or pit sooner near the coast. Ask which hardware finishes the manufacturer recommends for exposed entries, and how to clean them. The guide on salt air and home materials explains why coastal exposure changes the way some materials behave.

Think about the people who use the door. Lever handles are easier on hands than round knobs, and a door that is heavy to push may be hard for children or older family members. If accessibility is a concern, raise it at the walkthrough so the handle height and threshold are planned with it in mind.

Sealing the entry against rain, heat and pests

A good seal around an entry is made of several layers working together: weatherstripping on the jambs, a sweep or threshold seal at the bottom, tight clearances where the door meets the frame, and sealant between the frame and the wall. If any layer fails, you will notice drafts, light around the edges, humming in wind or water after a storm.

Water at the threshold is the most common complaint. It can come from a poorly sloped sill, a gap under the door, or wind driven rain pushing past a thin seal. The page on an entry door that will not seal explains what to observe and how to describe the symptoms to a contractor.

Ask how the threshold will be set, what sits underneath it and how it connects to the floor inside and the walk outside. Sealing is a detail that is easy to skip and hard to correct later, so it is worth asking for a plain description of the method.

Pests are part of the same story. Gaps under or beside a door give insects and small animals an easy way in, and worn sweeps are a common culprit. A tight, well maintained seal helps with comfort as well, since air conditioned air that leaks out through the edges costs you in comfort. Check the sweep and weatherstripping each season and replace worn parts before they fail.

Storm season and the entry

Front doors are among the openings people think about first when a storm is approaching. Whether a given door suits your home's needs depends on your building, your insurer and your local requirements, and this page cannot make that decision for you. What it can do is encourage you to ask the right people before you buy.

Ask your insurance agent how entry upgrades are viewed in your situation, and ask your city building department what approvals the work needs. If the door is part of a larger exterior opening plan, a conversation about windows and doors together can save effort and keep the look consistent.

For general context, the guide on hurricane season renovation planning helps you think through timing and protection while a project is under way. Keep a written record of every answer you receive.

Permits, associations and approvals

Replacing an exterior door may require a permit depending on your city and sometimes on the specific building. Where the work requires a permit, the company pulls it and schedules the inspections. For your address, the right source for what applies is your city building department, and the call is easy to make before any money changes hands.

Condos, townhomes and planned communities often have their own rules on exterior doors, including color, style, glass and hardware finish. An association may need to approve your plan in writing. Ask what forms are required, who signs them and how long the approval typically takes, as an open question and not as a promise.

The permit questions to ask your city checklist gives you wording for the call, and the page on working with HOA and condo rules helps you approach your association in an organized way.

Keep a simple file of the paperwork. It should include any association approval, the permit if one was needed, the product information for the door and hardware, and the written scope with the final price. If you sell the home or deal with an insurer in the future, a tidy file is far easier to produce than a search through old emails.

Preparing your home and protecting the foyer

Entry work means a lot of traffic through one doorway. Clear the foyer, remove rugs, pictures and tables, and protect floors from the path between the door and the work area. If you have a gate, a long walkway or a narrow porch, mention it so the crew can plan how to move the new unit and carry out the old one.

During replacement the opening is exposed, so think about security, pets and air conditioning. Ask how the entry will be closed up if the work spans more than one visit. The site is cleaned at the end of each working day, and you should not find sawdust and old trim waiting for you the next morning.

The guide to protecting floors during construction has practical ideas for foyers, and the checklist on preparing your home for contractors covers the rest of the house.

If you have deliveries, visitors or a daily routine that depends on that door, plan an alternate way in for the time the opening is being worked on. A back door or a garage entrance usually works, as long as it is clear and safe. Tell family members and anyone who has a key, so nobody is surprised by an open frame or a temporary lock.

Finish carpentry, paint and the final look

After the unit is set, the finish work brings it all together. Interior casing, exterior trim, caulk, paint and touch ups determine whether the door looks like it has always belonged. Ask who handles the paint on the slab, the frame and the trim, and whether touch up around stucco or wall repairs is part of the scope.

If you are installing a door that arrives unfinished, ask when and how it will be sealed and painted, because bare surfaces take on moisture readily. A door with a good finish on all sides, including the top and bottom edges, resists weather far better than one finished only where it can be seen.

If interior trim will be replaced, the page on interior doors and trim carpentry shows how consistent reveals and clean joints are achieved, and the same ideas apply to the casing around a front door.

Think about the threshold finish where the door meets the floor. A transition strip, a stone sill or a tile edge each makes a different statement, and each has to be sealed so water cannot creep underneath. Decide on the look before the work starts, so the person doing the install can leave the right height and the right support for the material you picked.

The final walkthrough

When the work is done, open and close the door many times from inside and outside. Lock and unlock it, listen to the latch, look at the gaps along the edges, and check that the door does not drift open or swing shut by itself. Test any electronic hardware and any sidelights for tight seals and clean glass.

Walk the punch list together with your point of contact before final payment. This is the moment to raise scuffs, uneven caulk, paint touch ups or hardware that is not quite aligned. Everything noted gets written down so that nothing is lost between a conversation and a follow up visit.

The punch list checklist offers a convenient list of things to look at, and the punch list and final walkthrough page explains how the closing stage works. Keep your product information and any permit paperwork together for future reference.

Common questions

Can I replace just the door slab and keep the frame?

Sometimes, if the frame is square, solid and dry. A walkthrough is the only way to know. If the frame has rot, termite damage or movement, a new slab will not solve the problem and may fail to seal. The decision is made on what is found at the opening and written into the scope.

Do sidelights need to match the door?

They do not need to be identical, but they should look intentional. Matching frame color and a consistent glass style give a clean result. Some homeowners choose frosted glass beside the door and clear glass in the door itself. Show your contractor examples you like, and the scope can list the exact choices.

What should I ask about hardware?

Ask what handle set and lock come with the quote, what finishes are available, how the hardware holds up in humid or salty air, and whether the keyed cylinders can match other doors in your home. Also ask how electronic locks are powered and what the backup plan is if the power fails.

Who repaints the exterior around a new door?

That should be spelled out in the written scope. Ask whether stucco patching, paint touch up and caulking around the new frame are included and how color matching is handled. If the answer is vague, ask for the item to be added so that the final look is not left to chance.

What if my association has door rules?

Check with them before you order. Associations may regulate color, style, glass, hardware finish and work hours, and approvals sometimes need to be in writing. A door made to the wrong specification can be difficult to reuse, so it pays to get clarity first and keep the approval in your records.

How do I know if the old door is leaking at the frame?

Look for stains below the threshold, soft or swollen trim, peeling paint, daylight around the edges or water after rain. Photograph what you see and share it at the walkthrough. A contractor can then check whether the cause is the door, the seal, or the wall around it.

Want this priced properly? Start with a walkthrough.

Call (954) 331-7392
Tap to Call , (954) 331-7392