Home · Planning · Permit Questions to Ask Your City Before You Start

Permit questions to ask your city before a renovation starts

Requirements differ from one city to the next, and from one project to the next. This page gives you the questions worth asking your building department so nothing about permits comes as a surprise halfway through.

Call (954) 331-7392
Home exterior with lush garden landscaping
Design inspiration

Why the city is the source of truth

Every city and municipality in South Florida runs its own building department, and each one has its own forms, its own counter or online portal, and its own habits about what it wants to see. A contractor can tell you what usually applies, and a good one will. But the only office that can tell you what applies to your address and your scope is the one that will eventually sign off on it.

That is why this page is a list of questions rather than a list of answers. We are not going to tell you that a particular kitchen change needs a permit or that a particular window swap does not. Requirements vary by city, by building type and by the exact work being done, and they change over time. What we can do is help you walk into the conversation prepared, so the answers you collect are specific and written down.

If you want the broader picture of how permits fit into a renovation, our guide to permits for home renovation covers the general flow. This page is the practical companion: the actual questions, in a sensible order, with notes on why each one matters.

One more point before the questions. Building departments are staffed by people who answer the same questions all day, and most of them would rather you ask early than discover a problem after the work is built. Being polite, specific and willing to write things down goes a long way. You are not challenging anyone by asking how the process works. You are simply making sure the project, the paperwork and the inspections all describe the same piece of work, and that is something every party involved wants.

What to gather before you call or visit

The most useful call to a building department is one where you can describe the project clearly. Before you reach out, write a plain description of the work in a few sentences. Say which rooms or parts of the house are involved, whether walls, openings, plumbing, wiring or the roof will change, and whether anything is being moved or only replaced in the same spot.

Have your property details ready: the address, whether it is a single family house, townhome or condo unit, and roughly when it was built if you know. Older homes and newer homes can be handled differently, and a condo unit adds a second layer of approvals that we cover below. If you have a written scope from a contractor, keep it beside you, because the scope is the document the city's questions will be measured against.

Finally, bring a notebook or open a note on your phone. You will hear names, form numbers and next steps, and you will want to record who said what and on which date. A few lines of notes taken during the call can save an argument later about what the city actually told you.

  • Write a short plain description of the work and the rooms involved.
  • Note whether structure, plumbing, wiring, openings or the roof will change.
  • Have your address and property type (house, townhome or condo) in front of you.
  • Keep your contractor's written scope nearby for reference.
  • Record the date, the name of the person you spoke with and what they said.

The first question: does this work need a permit at all

Start with the simplest question and ask it in a way that gets a clear answer: here is what I plan to do, does this scope require a permit in this city. Describe the work the way you would to a stranger, without jargon. If the person on the line asks follow up questions, that is a good sign, because it means they are fitting your project to their categories. If the first person you reach is unsure, ask whether someone else in the office handles your type of project, and call again rather than settling for a vague answer. A vague answer today can turn into a stop work conversation later.

Ask about the project as a whole and also about its parts. A bathroom renovation might include tile, a vanity, a shower valve, a fan and a light fixture, and the city may treat some of those differently from others. Ask which parts are covered and which are not, and ask whether the answer changes if you move a fixture rather than swap it in place.

It is also fair to ask who is expected to apply. In many places the contractor handles the application as part of the job, and in others the homeowner may be listed in some capacity. Ask what the city expects in your case, and then check that what your contractor plans to do matches. Our own approach, described on the services page, is that permits are pulled where the work requires them, but you should still hear the city's version of the story yourself.

Questions about drawings, documents and approvals

Once you know a permit is involved, ask what the city wants to see with the application. Some projects need only a simple description and a contractor's details. Others call for drawings, product specifications or engineering for certain elements. Ask what format the drawings should be in, who is allowed to prepare them, and whether the city will accept a hand drawn sketch for small work or requires something more formal.

Ask whether product approvals matter for your scope. If your project involves openings in the exterior walls, the city may want documentation on the products being installed. You do not need to understand the paperwork, only to ask what it is called and who provides it. Our impact window basics guide explains why that documentation tends to come up with windows and doors.

Ask how applications are looked at once they arrive. Are they handled in the order received, is there a separate look from different trades, and will you be contacted if something is missing or does the application simply sit. Ask also whether you can check the status yourself online or whether someone has to call you. Knowing which of those applies saves a lot of guessing while you wait. Ask how you will know when the permit is approved and how you will receive it. The point is to learn the process, not to predict how long it will take, since the city is the only office that can speak to that.

Questions about inspections

Permits and inspections go together, and the inspection side is where homeowners are most often caught off guard. Ask which inspections are likely for your type of work and at which stages they happen. Some inspections need to happen while walls are still open, which means the work has to pause and the area has to stay accessible until the inspector has seen it.

Ask how inspections are scheduled and who requests them. In most arrangements the contractor schedules them, but you should know the process so you can ask, in plain words, whether an inspection is coming up and what it is for. Also ask whether someone needs to be home, whether the inspector needs access to certain rooms, the attic or the panel, and whether pets or stored belongings could get in the way.

Finally, ask what happens when an inspection does not pass. Usually a correction is made and the inspection is requested again, but the details are the city's to explain. Knowing the general path ahead of time helps you stay calm if it happens, and it helps you understand a change in the project schedule when your contractor explains it. If you want to plan around that kind of uncertainty, the page on schedule and lead time planning shows how to sequence orders and trades without leaning on fixed dates.

Condos, townhomes and associations

If you live in a condo or a townhome community, there is usually a second set of approvals that sits in front of the city's. Your association may need to approve the work, may have rules about which days and hours work can happen, and may require paperwork from the contractor before anyone is allowed on the property. We cannot tell you what your association requires, because every community writes its own rules. Ask the management office or the board directly, and ask for the answer in writing.

The order of operations matters here. Some associations want to see the plan before the city does, and some cities want proof of association approval before they accept an application. Ask both offices which comes first and whether either one needs to see the other's paperwork. It is common to loop back and forth once, so leave room for that in your plans.

Our page on working with HOA and condo rules goes into the association side in more detail, and the condo renovation planning service describes how we approach those projects. For now the key point is simple: treat the association and the city as two separate conversations, and keep notes on both.

Questions about structure, utilities and special conditions

Some projects involve more than surface finishes, and the city may care about those parts in particular. If you plan to remove or move a wall, ask whether the city expects an assessment of whether it carries load, and who it expects to perform that assessment. Whether a wall is load bearing is a planning question, not something to guess at, and it affects drawings, scope and sequence.

If your project touches electrical, plumbing or mechanical systems, ask how the city handles those trades. Some specialist work is done by a specialist trade under our coordination, and the city may have its own requirements about who is allowed to pull or sign for that work. Ask what documentation the city wants and when it is needed.

Ask about conditions specific to your property. A home near the water, in a flood prone area or in a community with extra requirements may face additional steps. We will not state what those steps are, because they depend on the address. Ask the building department what applies to yours, and ask your insurer separately if you have questions about how a change could relate to your coverage. Our guide to hurricane season renovation planning explains why timing and exterior work deserve special attention in this region.

Fees, timing and who pays for what

Ask the city how fees are structured and when they are due. You are not trying to estimate a total on the phone, only to learn the shape of it: is there a fee at application, another when the permit is issued, and separate charges for inspections or re inspections. Ask which of those appear on a receipt you can keep.

Make sure you and your contractor agree on how permit costs appear in the written scope. A clear scope says whether permit fees are part of the fixed price or handled separately, and who is responsible for them if the city asks for something unexpected. This is the same logic behind reading a written scope: anything not stated is a question waiting to become an argument.

On timing, the honest approach is to ask the city how its process works and then plan around that rather than around a hoped for date. Ask whether the city publishes anything about its stages, and ask your contractor to build the permit process into the sequence of work. Orders for windows, cabinets and other materials can often be timed around the permit, and the page on lead times and ordering shows how to think about that without making promises.

Changes after the permit is issued

Plans change. A homeowner picks a different shower layout, or something unexpected shows up behind a wall. Ask the city how changes are handled once a permit is already open. Does a revision need to be filed, does the inspector need to be told, and does a change in scope affect the permit already issued.

This ties directly to how we handle surprises. Anything found behind a wall pauses the work and comes to you as a written change order with a price before it proceeds. If the change also touches the permit, the paperwork should move at the same pace as the decision, so nobody builds something the city has not seen. Our guide to change orders shows what a good one looks like.

Keep a single folder for everything permit related: the application, the approved permit, inspection results, correction notices and any notes from phone calls. When the project closes out, you will want that folder. It is also the record you will hand to a future buyer, an insurer or an association if any of them ask what was done and whether it was approved.

A simple call script and a tidy record

If phone calls make you nervous, use a script. Introduce yourself, give your address, say whether it is a house, townhome or condo, and describe the project in two or three sentences. Then work down the list: does it need a permit, who applies, what documents are required, what inspections to expect, how fees work and what happens if the plan changes. Ask for the person's name and the preferred way to follow up. Write down any reference number the office gives you for your address, because it makes the next call far easier.

After the call, send a short message to your contractor summarizing what you learned. Something as simple as the date, the name of the person you spoke with and the answers in a few lines is enough. It gives your contractor a chance to correct any misunderstanding early, and it creates a record you both can point to. For a view of how that fits into the larger picture, the page on building a communication plan shows how decisions are recorded from start to finish.

If you are comparing contractors, notice how each one talks about permits. A contractor who invites your questions, explains the process in plain words and is comfortable with you calling the city yourself is easier to work with than one who waves the topic away. You can also use the questions in choosing a contractor questions to start that conversation before any contract is signed.

Common questions

Do I have to call the city myself if my contractor handles permits?

You do not have to, but it is often worth one call. Your contractor knows the usual process, while the city can confirm what applies to your address and scope. A short call, with notes taken and shared back, helps you understand the project and lets you spot any mismatch between what the city says and what your contractor expects.

What should I say when I describe my project to the building department?

Describe it in plain words: which rooms are involved, whether walls, openings, plumbing, wiring or the roof change, and whether things move or are replaced in place. Mention whether you own a house, townhome or condo. The clearer the description, the more specific the answer you will get, and the less likely it is to change later.

Who decides whether my condo needs approval from the association?

Your association decides its own rules, and the city decides its own. They are separate conversations. Ask the management office or the board what they require and ask for it in writing, then ask the city whether it needs proof of that approval. Requirements vary by community, so never assume the answer from a neighbor's project.

What happens if an inspection does not pass?

The details belong to the city, but the general path is that the issue is corrected and the inspection is requested again. Ask the building department how that works in your city before the work begins. Your contractor should explain what failed, what is being done about it and how it affects the sequence of work.

Can I change my plans after the permit is issued?

Changes are common, but they may need to be reported to the city, depending on what changes. Ask the building department how revisions are handled once a permit is open. Between you and your contractor, any change should be written down as a change order so the scope, price and paperwork stay in step with each other.

How do I keep permit paperwork organized?

Keep one folder, paper or digital, for the application, the issued permit, inspection results, correction notices and notes from calls. Record dates and the names of people you spoke with. At close out, this folder becomes your proof of what was approved and inspected, which is useful for future buyers, insurers or associations who ask.

Want this priced properly? Start with a walkthrough.

Call (954) 331-7392
Tap to Call , (954) 331-7392