Home · Guides · Planning a Tub to Walk In Shower Swap in Broward

Replacing a Tub With a Walk In Shower: A Planning Guide

Swapping a tub for a walk in shower sounds simple until you look behind the wall. This guide walks Hollywood and Broward homeowners through the decisions that matter, in the order they actually come up.

Call (954) 331-7392
Bright kitchen with island and pendant lights
Design inspiration

Start with what the tub does for you today

Before anyone talks about tile or glass, spend a week noticing how your household uses the tub. Some tubs are used every day as a place to stand under a shower head, with the bathing part forgotten years ago. Others still serve a purpose, such as bathing a small child, soaking after a long shift, or washing a dog. The swap pays off most when it solves a real daily annoyance rather than following a trend.

Write down three things: who uses this bathroom, what they do in the tub, and what frustrates them. Common answers include stepping over a high wall, a slippery floor, a curtain that clings, a faucet that is awkward to reach, and caulk lines that never stay clean. Each complaint points to a design choice later, such as a lower entry, a better floor surface, a glass panel in place of fabric, or controls that sit near the door.

If this is the only tub in the house, pause. A home with a single bathing fixture can be harder to sell or to live in for a family with small children. You can still go ahead, but make the decision on purpose. Talk it through with everyone in the household, and if resale is a concern, mention it during the walkthrough so the plan can account for it.

Reading your bathroom before you choose a design

Most tub to shower swaps happen in an alcove, which is the three walled space where a standard tub sits between a back wall and two end walls. The alcove gives you a ready made footprint and a framed enclosure, which is why this is the most common conversion. Your first job is to look at what surrounds that footprint, because the neighbors decide how much freedom you have.

Stand in the doorway and look at the tub end, the far wall, and the wall that holds the plumbing. Notice where the vanity and toilet sit, where the door swings, and whether a window sits inside the wet area. A window in a shower is not a deal breaker, but it needs a plan for waterproofing, trim and privacy. Notice also whether the ceiling is low or has a soffit, since that affects glass height and ventilation.

Then think about the room beyond the alcove. Some owners borrow space from a linen cabinet, a closet shared with the next room, or an oversized vanity to widen the shower. Others keep the footprint and focus on the entry. Both are reasonable. A short walkthrough with a tape measure will tell you far more than a catalog photo, and the broader bathroom renovation scope can be sized once those measurements exist.

Three ways to shape the new shower

The first approach reuses the tub footprint exactly. The new shower sits where the tub did, the plumbing wall stays put, and the main change is the floor and the front opening. It is the most predictable route because the drain and supply lines are already close by. Expect a modest shower, but one that feels far more open than a tub with a curtain.

The second approach enlarges the footprint. You might extend the shower past the old tub end, remove a short partition, or steal depth from a neighboring closet. A bigger floor lets you add a built in bench, a wider entry, or a second shower head. It also means more framing work, more tile, and often more plumbing changes, so it deserves a clear conversation about scope before anything is ordered.

The third approach is a curbless or very low threshold shower, where the floor of the bathroom flows into the shower with little or no step. It looks open and is easier on knees and walkers, but it asks the most of the structure, because the shower floor has to slope to a drain while sitting level with the room. Older block homes and slab floors each present different challenges here. The overview on walk in shower remodeling shows how these styles fit together.

  • Reuse the footprint when the plumbing wall is sound and you mainly want an easier step in.
  • Enlarge the footprint when you want a bench, a wider opening, or room for two people to move.
  • Choose a curbless layout when long term comfort and mobility are the top priorities.
  • Compare each option against your door swing before you fall for a photo.

What really happens behind the wall and under the floor

A tub and a shower share a wall of pipes, but they do not share a drain. A tub drains from a point near one end, tied to an overflow. A shower drain sits within the floor of the shower and must connect to a trap and a vent. In many cases the old tub drain can be adapted, but sometimes the new drain needs to move toward the center of the pan, which changes the work below the floor.

This is where the house itself matters. A home built on a concrete slab, which is common across South Florida, may need part of that slab opened if the drain moves. A home on a raised floor may allow access from beneath. A condo may have limits on what can be changed, because the floor below belongs to a neighbor. None of this is a reason to worry, but it is a reason to ask early and to expect your contractor to look closely during the walkthrough.

The valve and supply lines deserve the same attention. A new shower usually wants a valve at a comfortable height near the entry, so you can turn on the water without stepping into the spray. Old galvanized or aging supply lines may be worth replacing while the wall is open. Opening a wall is the easiest moment to improve what hides inside it, and the cost of regret later is much higher. Describe your goals plainly, and let the scope document explain what will be touched.

Waterproofing is the part you never see and always feel

A shower looks like tile, but tile is not what keeps water out. Grout is porous and tile joints let moisture through. The real protection is a waterproof layer behind or beneath the tile, sloped floors that send water to the drain, and careful detailing at corners, niches, the valve and the drain itself. If that layer is wrong, the shower may look perfect for a while and then fail where nobody can see.

In a climate like ours, a failure spreads in ways you may not notice. Humid air, warm temperatures and trapped moisture invite mildew inside walls, soften framing and lift floor finishes in the next room. The signs often show up as musty smells, stained baseboards outside the shower, or grout that never seems to dry. Our guide on bathroom waterproofing explains the main systems and why the details at the edges matter most.

Ask your contractor to describe, in plain words, what goes on the walls, what goes on the floor, and how the two are joined. Ask whether the pan is tested by holding water before tile goes on. A confident answer is a good sign. Vague promises are not. You can also read about bathroom tile and waterproofing to learn the vocabulary before the walkthrough.

The base, the threshold and the glass

The shower base is the foundation of the experience. Prefabricated bases are molded in one piece and come in set sizes, which suits standard alcoves and keeps the number of joints low. A tiled floor over a sloped mortar bed can be shaped to any size and can run level with the bathroom, but it relies heavily on the waterproofing beneath. Neither is better in every case. The right choice depends on the opening, the floor structure, and how much customization you want.

The threshold, or step in, deserves careful thought. A low curb keeps water in without a door. A flat entry looks seamless but depends on a drain layout and a floor slope that work together. Think about who will use it five or ten years from now, not just today. A bench, a wide opening and a handheld shower wand are small features that make daily use easier for almost everyone.

Glass is the next choice. A fixed panel with an open end keeps the bathroom airy and works well when the shower is large enough to stay dry. A hinged or sliding door contains more spray in a smaller space. Clear glass shows off tile and makes a small room feel bigger. Frosted or patterned glass adds privacy. Ask about hardware finishes that stand up to humidity and cleaning, and plan the door swing so it never collides with the vanity or the toilet.

Tile, grout and surfaces for a humid climate

Tile on the shower floor has a different job from tile on the wall. The floor needs grip when wet and a layout that lets water move toward the drain. Smaller tiles, such as mosaics, bend to a sloped floor and add more grout lines, which means more texture underfoot. Larger tiles look clean and need fewer joints, but they are harder to lay on a slope unless the floor is carefully shaped. Surface texture matters more than color.

On the walls, large format tile or slab panels reduce grout lines and make cleaning easier. Natural stone is beautiful but needs sealing and regular care, which not everyone wants in a wet room. Porcelain handles moisture well and comes in endless looks. Our guide on choosing tile for Florida homes covers finish, hardness and maintenance in more depth.

Grout deserves a decision of its own. Cement based grout is traditional and needs sealing. Epoxy and urethane grouts resist staining and are more forgiving in damp rooms, though they are less forgiving to install. Choose a grout color close to the tile so any wear is invisible, and ask how the corners and the floor joint will be finished with flexible caulk rather than rigid grout, since those spots move with the house.

  • Pick a floor tile with real texture, then confirm that it feels comfortable on bare feet.
  • Keep grout lines narrow and consistent so they are easier to clean.
  • Use a flexible sealant at every change of plane, not grout.
  • Bring a sample into the actual bathroom light before you commit.

Controls, niches, seating and the little things you will use daily

Small details make the biggest difference after the project is done. Decide where the valve sits, so you can reach it from outside the spray. Choose a shower head that suits your height and your household, and consider a handheld wand on a slide bar for rinsing, cleaning and sitting. These choices cost little in planning and prevent a lot of annoyance, so make them before the walls close.

A recessed niche replaces the clutter of bottles on the floor, but a niche is also a hole in a waterproof wall, so it has to be built with care. Place it where it will not be hit by the main spray and where it lines up with the tile pattern. A built in bench or fold down seat adds comfort for people of all ages. If you think you may want grab bars now or later, ask for solid blocking inside the wall at the time of framing, so bars can be anchored securely.

This is where planning overlaps with accessibility. A wider opening, a seat, and a sturdy place to hold on make a bathroom usable for longer. Our notes on accessible home features and aging in place remodeling go deeper.

Ventilation, lighting and getting the room to dry

A new shower will not stay new in a room that cannot dry. Ventilation is the quiet partner of waterproofing. A fan that is too weak, that vents into the attic, or that is rarely switched on lets steam settle on walls and ceilings. Ask whether the existing fan is sized for the room and where it ducts. If it is old, noisy or poorly placed, replacing it while the ceiling is accessible is wise. See poor ventilation in bathrooms for common symptoms.

Lighting counts too. A shower that is dim becomes hard to clean and uncomfortable to use. A fixture made for wet areas inside the shower, or good light just outside it, helps you see what you are doing. Pair the light with a switch placed where you can reach it from the doorway, and consider a separate switch for the fan so you can leave it running after the shower ends.

After the project, simple habits protect your work. Squeegee or wipe glass, leave the fan on for a while, and leave the door open when you can. Clean grout and sealant lines gently and check them from time to time. Small gaps repaired early cost very little compared with the damage that a slow leak can cause behind a finished wall.

Condos, townhomes and the approvals that come first

Much of Broward is condos, townhomes and communities with associations, and each has its own rules about renovation. Some require written approval before any plumbing work starts, some limit work hours, some require protection of hallways and elevators, and some regulate what can be done to floors that sit above a neighbor. These rules vary from one building to the next, so ask your association for its written requirements before you finalize a design.

Cities and counties also have their own expectations for permits, inspections and plumbing changes. Requirements vary by location and by the scope of work, so call your city building department, or ask your contractor to explain what applies to your address. Our overview of permits for home renovation and the checklist on working with HOA and condo rules can help you prepare questions. For multi unit buildings, the condo renovation rules guide adds more.

This page is general guidance for homeowners in Hollywood and nearby communities, not a statement of any local rule. If you live in Hollywood or a neighboring city, treat your association and your city as the final word on what is allowed, and bring their answers to the walkthrough so the plan can be built around them.

Preparing for the walkthrough and comparing proposals

A good walkthrough begins with a short list. Bring photos of the current bathroom, notes on who uses it, and any pictures of showers you like. Be ready to say what you want to keep, such as the vanity, the flooring or the toilet, and what you are happy to replace. Mention any history of leaks, soft spots or stains, since those shape what lies behind the tub wall.

Projects here start with a phone call and a walkthrough, and the scope is discussed before work begins. Prices depend on scope and are discussed after the walkthrough, so the conversation should focus on decisions: the footprint, the drain, the base, the glass, the tile and the ventilation. Ask for the scope in writing, with each of those items named, so nothing depends on memory.

When you compare proposals, compare what each one actually includes. Does it describe the waterproofing system? Does it mention the drain, the valve, the fan and the glass? Does it say who handles disposal and protection of floors? A proposal that is short on detail leaves room for surprises. Use the bathroom selections checklist to keep your choices organized. The page on tub to shower conversions gives the service overview.

Common questions

Can any tub be replaced with a walk in shower?

Most alcove tubs can be converted, but the answer depends on the drain, the plumbing wall and the floor structure. Some bathrooms need minor changes, while others need framing or floor work. A walkthrough is the only reliable way to tell which category yours falls into, so bring photos and measurements to the conversation.

Will I lose resale appeal if I remove my only tub?

It can matter, especially for buyers with young children. If this is the only bathing fixture in the house, think about whether another bathroom might offer one. Talk through the tradeoff with your household and mention resale during the walkthrough, so the design can weigh both comfort today and flexibility later.

Is a curbless shower a good idea in an older home?

It can be, but it asks more of the floor. The shower floor must slope to the drain while meeting the bathroom floor, which may require lowering part of the structure. Older block homes and slab floors each pose different challenges. Ask for a clear explanation of how the slope and waterproofing will be handled.

Do I need a permit to convert a tub into a shower?

Requirements vary by city, county and the scope of work, especially when plumbing is changed. Condos and communities with associations often add their own approval steps. Call your city building department and your association before work starts, and ask your contractor to explain what applies to your address.

Which is better, a prefabricated base or a tiled floor?

Neither wins in every case. A prefabricated base has fewer joints and suits standard openings. A tiled floor over a sloped bed can fit odd sizes and run flush with the room, but depends heavily on the waterproofing beneath it. The right choice depends on your opening, your floor and how much customization you want.

How do I keep a new shower from growing mildew?

Good ventilation and simple habits do most of the work. Run the fan during and after showers, wipe or squeegee glass, and keep the door open to let the room dry. Check sealant lines from time to time and repair small gaps early, before moisture finds its way behind the wall.

Want this priced properly? Start with a walkthrough.

Call (954) 331-7392
Tap to Call , (954) 331-7392