What walk in really means
The phrase walk in shower covers several designs. Some have a low curb, a small step of tile or stone that holds water in. Some have no curb at all, with the floor sloping gently to a drain so you simply walk in. Some are open on one side with a fixed glass panel and no door. All of them remove the high tub wall that people have to step over.
Why do people choose them? Many want an easier, safer entry for themselves or for parents who live with them or visit. Others want a bathroom that looks larger and more open, with fewer lines cutting through the room. Some are simply tired of a tub they never use. Our walk in shower versus tub page helps you weigh those choices honestly.
If your current shower or tub is hard to use because of height, size, slipperiness or a narrow door, the page about hard to use showers and tubs describes what to observe before deciding. Write down what you like and dislike about your present bathroom, since the answers shape every choice that follows.
Think about who uses the shower and how. A tall person needs a high shower head and room to move. A child needs a handheld sprayer. A person who prefers to sit needs a seat and a handheld control within reach. Cleaning habits count too: some households want a squeegee and glass, others prefer an open design that dries on its own in the air of a well ventilated room.
Curb or curbless: a decision with consequences
A curbed shower keeps the floor of the bathroom and the floor of the shower at different heights. The curb holds water in and gives glass a place to land. It is the more straightforward build in most homes. A curbless shower makes the shower floor flush with the bathroom floor, which feels seamless and welcoming but requires the floor structure to be lowered or the shower area to be recessed.
That recess is the hard part. Lowering a floor means working with the framing or the slab beneath it. In a wood framed home, joists may need modification. In a slab home, which is common in South Florida, the slab may need to be cut and the drain relocated. These changes affect cost, schedule and permits, and they must be understood before you choose a curbless design.
Many homeowners land in the middle with a very low curb or a gentle threshold. It still reduces the step, and it keeps water where it belongs. Whichever you choose, the floor must slope toward the drain in a way that sheds water without feeling tilted. Ask your contractor how the slope will be built and how it will look under your tile pattern.
The transition between shower and room also deserves attention. A curbless entry needs a plan to keep water from running out the door, which usually means the bathroom floor slopes slightly toward the shower, the drain is located at the right spot, and the glass or a fixed panel stops spray. The shower area is larger than the visible tile, because water can reach farther than expected.
- Curbed: simpler build, holds water in, gives glass an edge to sit on.
- Curbless: seamless look and easier entry, but needs structural planning.
- Low threshold: reduces the step while keeping the build manageable.
- Ask how the floor slope will be built and tested before tile goes down.
Waterproofing is the real shower
Tile is not waterproof. Tile and grout are a decorative, durable surface, but water passes through grout and can travel behind the tile. What makes a shower hold water is the waterproofing layer behind and beneath the tile. It can be a sheet membrane, a liquid applied membrane or a system of foam backer boards with sealed joints. Each has rules for corners, seams and penetrations.
A shower pan, the floor of the shower, is where mistakes hurt most. It needs the right slope, a correct drain assembly and a membrane that is continuous up the walls beyond the water line. Many shower failures begin as small defects here that grow over time. For a thorough explanation, read bathroom waterproofing explained and see our service page on bathroom tile and waterproofing.
Ask what system your contractor plans to use and why. Ask whether the membrane will be tested, for example by filling the pan and watching the water level, before tile is installed. Ask what is done around niches, benches, valves and the glass attachments. A clear answer shows a thoughtful process. We pull permits where the work requires them and schedule inspections, and your city decides what is required.
Pay attention to the corners and the places where the plane changes. Walls meeting the floor, walls meeting other walls and the base of a niche are the spots where a membrane is most likely to be cut or folded wrongly. Ask your installer to describe how these details are handled and to photograph them before tile covers them, so that you have a record of what is behind the finished surface.
Drains: point, linear and the slope they need
Drains come in two broad forms. A point drain sits at a spot, often the center or a corner, and the floor slopes toward it from several directions. A linear drain is a long channel, usually along a wall or at the entry, and the floor slopes in one direction toward it. Linear drains allow larger tiles and a simpler slope, and they look sleek.
The drain also decides how the pan is built. A point drain needs a floor that slopes on all sides, which means smaller tile or cut tile to follow the shape. A linear drain permits a single plane slope that suits large format tile. Neither is better in all cases. The right drain is the one that matches your tile, your floor structure and the way your shower is laid out.
Drain location is a plumbing decision as well as a design decision. Moving a drain in a slab home can mean cutting concrete and connecting to existing lines. It is skilled work done by a specialist trade under our coordination. If you want to keep the drain where it is, tell us early. It can simplify the project and lower disruption, while still allowing a new look.
Drain covers are a design choice as well. A tile in drain cover disappears into the floor, a metal grate stays visible, and a long channel can be styled to match your fixtures. Whatever you choose, hair and soap collect in a drain, so ask how the cover comes out and how easy it is to clean. A beautiful drain that you cannot clean will not stay beautiful.
Glass, doors and the open look
Glass keeps water inside the shower while letting light through. Frameless glass has minimal hardware and a clean look. Framed glass uses metal edges and is a different style and build. Fixed panels with no door create the most open feel, but they need a shower large enough that spray does not reach the room, and a layout that suits it.
Hardware matters in a humid, salty climate. Hinges, handles and brackets should be made of materials that resist corrosion, and the glass should be sealed properly at the edges. Ask what finish and material the hardware uses, and how the glass is supported at the wall and curb. Glass is heavy, and the wall behind it must be prepared to hold it.
Glass is usually ordered after the shower is built and measured, because tile thickness and wall angles change the final size. That means a gap can occur between tile completion and glass installation. Plan for it, and ask how the shower can be used or closed off in the meantime. Lead time for glass is a question to ask rather than a number to assume.
Water spots are a fact of life with glass in areas with mineral rich water. Some glass can be treated with a coating that helps water bead and run off. Ask what options exist, what they involve, and what care they need. The honest answer is that every glass surface needs some regular wiping, and the right choice is the one you will actually maintain.
Niches, benches and shower fixtures
A niche is a recessed shelf built into the wall for soap and shampoo. It keeps bottles off the floor and out of the way. A niche must be waterproofed with the same care as the rest of the wall, and its bottom must slope slightly to drain. Placement matters too: avoid putting it on a wall where a shower head sprays directly into it, and keep it at a convenient height.
A built in bench gives a place to sit and shave, or a seat for someone who needs support. It adds structure and waterproofing that must be planned. A fold down seat is another option that preserves floor space. If you are planning with accessibility in mind, ask about grab bars, which need solid blocking behind the wall at the right locations before tile is set. See our guide to accessible home features.
Fixtures include the valve, shower head, handheld sprayer and controls. Valves are installed during the rough plumbing stage and must match the trim you choose later. Choose your fixtures before demolition goes too far, so that valves, pipes and spacing are correct. Rain heads, body sprays and multiple controls add pipes and valves, and each one adds cost and complexity, so decide how much you will really use. A single good shower head with a handheld often serves a household better than a wall full of nozzles. Our bathroom selections checklist keeps all of these decisions in one list.
Tile and slip: choosing surfaces that work wet
Tile selection for a shower has two jobs: it must look good and it must be safe underfoot. A shower floor needs more grip than the walls. Smaller tiles have more grout lines, which provide natural traction and make it easier to follow a slope. Larger tiles on the floor look cleaner but may need textured surfaces and careful slope work. Ask about the slip resistance of your floor tile.
Wall tile has more freedom. Large format tile reduces grout lines, which means less to clean and less chance for mildew. Smaller tile and mosaics add pattern. Natural stone looks beautiful but needs sealing and care. Glass tile is slick and bright. In a climate with high humidity, choose materials and grout that resist mold and stains, and plan for ventilation. Our guide on choosing tile for Florida homes helps with these choices.
Grout choice matters. Epoxy grout resists stains and moisture better, while cement grout is more common and needs sealing. Mildew shows first on light grout in damp corners. Ask your installer about the product, the cleaning routine and when to reseal. Our page on moldy grout and caulk explains what to look for as the years pass.
Ventilation, light and the room around the shower
A shower produces a lot of moisture, and where that moisture goes affects your whole bathroom. A properly sized exhaust fan that vents outdoors, on its own switch or a timer, removes steam before it settles on walls and ceilings. If your bathroom lacks one, or the fan is weak or vents into the attic, the page on poor ventilation in bathrooms describes the signs.
Lighting in a shower must be suited to wet locations. Fixtures installed inside or directly over a shower have specific requirements, and your city and your electrician determine what applies. Plan lighting that makes the shower visible without glare, and put it on a switch that is easy to find. Natural light from a window should be considered, along with privacy and moisture.
Think about the rest of the room as well. A new walk in shower in a small bathroom can change how the toilet, vanity and door work together. Layouts shift in a small bathroom when a tub goes away. Decide what the room around the shower needs before you finalize the footprint.
If a tub is coming out
Many walk in showers replace a tub. The tub alcove is already framed and plumbed, which can make the conversion simpler than a new build. But the old tub drain, supply lines and wall surfaces rarely match what a shower needs, and removing a tub may reveal hidden damage. Our service page on tub to shower conversions covers the process in detail.
What is behind a tub wall is often a surprise. Years of moisture can affect framing, subfloor and drywall. When we find anything like that, work pauses and it comes to you as a written change order with a price before it proceeds. You decide with the facts in front of you. If you suspect trouble already, read about soft spots in the bathroom floor.
If the household includes someone who may need more support in the future, consider that now. Wider openings, blocking for grab bars and a shower seat are easy to include and hard to add. Our aging in place remodeling page explains how those decisions fit into a larger plan.
Scope, schedule and the finish
The written scope for a walk in shower should name the entry type, the pan system, the waterproofing method, the drain, the tile, the glass, the fixtures, the niche, the ventilation and the finishing work. A fixed price is set against it before work begins. Undecided items appear as allowances, and you should compare how estimates handle them.
Every project begins with a walkthrough and one point of contact stays with you from estimate to punch list. Core trades are in house, and specialist work such as some plumbing or electrical work is done by a specialist trade under our coordination. Permits are pulled where the work requires them and inspections are scheduled.
At the end of each working day we clean the site, and at the end of the job we walk the punch list together before final payment. You test the shower, look at the glass and tile, and check the drain. For the larger picture, visit bathroom renovation.
Common questions
Can I have a curbless shower in my home?
Maybe. It depends on the floor structure and the drain location. Wood framed floors may need joist changes, and slab floors may need cutting and plumbing adjustments. A walkthrough tells us what is possible, and your city decides what permits apply. A low curb is a common compromise.
How do I know the shower will not leak?
The answer lies in the waterproofing layer behind the tile, not the tile itself. Ask what system will be used and whether the pan will be tested with water before tile goes down. Permits are pulled where the work requires them, and inspections are scheduled.
Do I need a glass door on a walk in shower?
Not always. Some layouts use a fixed glass panel with an open side, and some use no glass at all. It depends on the size of the shower, where the spray lands and how much splash you accept. We discuss placement during the walkthrough.
What happens if the old tub wall has hidden damage?
Work pauses in that area, and the finding comes to you as a written change order with a price before it proceeds. Common findings include soft framing, stained subfloor and failed past repairs. You choose how to proceed with the facts in front of you.
When should I choose my shower fixtures?
Before the rough plumbing is set. Valves, pipes and spacing must match the trim you choose, and niches and benches depend on the plan. Use the bathroom selections checklist to settle fixtures early, so the work is not delayed by missing parts.
Will the shower glass be ready when the tile is finished?
Often not right away, because glass is measured after tile is complete. Ask your contractor and glass supplier about lead time, and plan for a short period when the shower is not usable. We do not promise a number, and we tell you if the schedule changes.



