Home · Guides · Laundry Room Renovation Ideas: Layout and Storage

Laundry room renovation ideas: layout, plumbing, venting and storage

The laundry room is one of the hardest working spaces in a home, and one of the most overlooked. This guide walks through layout, plumbing, venting, floors, lighting and storage so your next version works better.

Call (954) 331-7392
Bathroom with marble-look tile, warm wood vanity and gold fixtures
Design inspiration

Begin with how laundry actually happens in your home

Before drawing anything, follow a load of laundry through your day. Where do dirty clothes collect, where are they sorted and washed, where do they dry, where are they folded and where do they end up? In many homes the answer is a long trail of baskets across hallways and bedrooms. A renovation is a chance to shorten that trail and make each step easier.

Think about who does the laundry and how often. A household with children, athletes or pets may run several loads a day, while a smaller one may do a few a week. The volume affects the size of the machines, the amount of counter space for folding and the storage you need for detergent and supplies. It also affects the noise and heat that the room will produce.

Write down what annoys you about the current arrangement. Perhaps the machines are in a closet and cannot be reached comfortably, or the room is too hot, or there is nowhere to hang clothes. A list of real frustrations gives you better guidance than a catalog of attractive rooms, because it ties the design to the way you live.

Take photos of the current room from several angles and measure the walls, the doors and any windows. Note where the plumbing and the outlets are, and where the dryer vent exits. With these in hand, your contractor can tell you plainly which ideas fit and which would need changes behind the walls. It also helps you avoid falling in love with a layout that cannot work in the space you have.

Choosing the right location

Laundry rooms live in many places: a closet off a hallway, a corner of the garage, a room near the kitchen, a space beside the bedrooms or a stacked arrangement in a condo. Each has strengths. A location near bedrooms shortens the trip with clothes, while one near an exterior wall makes venting simpler, and one near existing plumbing keeps the work contained.

Moving a laundry area is a bigger project than updating one. Water supply, drains, electrical power and a dryer vent all need to connect, and they depend on the structure of your home. Ask your contractor which locations are practical and which would require significant changes, and what that means for the scope. In a condo, ask your association what is allowed before you plan to relocate anything.

If you are considering a new location, the pages on garage conversion planning and condo renovation planning offer context. The awkward room layouts page also describes ways to rethink a space that does not seem to fit.

Layout ideas that save steps

The simplest efficient layout puts the washer and dryer side by side with a counter above or beside them for folding. Stacked machines save floor space and suit narrow rooms, though they place the controls and the door at different heights, so consider who will use them. Front loading machines allow a counter over the top, while top loading ones need clearance above.

Plan the zones. A sorting area near the entry, a washing and drying zone, a folding surface and a place to hang or store clean clothes make the process flow. Think too about the way doors swing, since a door that bumps a machine or a counter is an irritation every single day. Sliding or pocket doors, or a door that swings into the hallway, can open up space in a tight room. A pull out hamper cabinet, a rod for hanging items to dry and a sink for soaking or rinsing add convenience without needing much space. In a small room, a folding shelf that lifts out of the way can serve instead of a permanent counter.

Leave room to move. Doors must open fully, people must be able to stand in front of machines to load them and there should be space for a basket on the floor. Ask your contractor to mark the layout on the floor with tape before cabinets are ordered, so you can walk through it. This simple exercise reveals problems that are hard to see on paper.

  • A folding surface at a comfortable height, close to the dryer.
  • A sorting area or pull out hamper near where clothes enter the room.
  • A hanging rod or drying rack for delicate items.
  • A deep sink for soaking and rinsing, if space allows.
  • Clear floor space in front of the machines for loading and baskets.

Plumbing: supply, drain and the box behind the machine

The washing machine needs hot and cold water supply lines and a drain. These connect to the plumbing in the wall, often through a recessed box that keeps hoses neat and allows shutoff valves to be reached. The position of this box affects where the machine can sit, and moving it is a plumbing job that should be done by qualified tradespeople.

Think about leaks. Washing machines are a common source of water damage, particularly in upper floors and condos, where a leak can affect neighbors. Ask your contractor about options for protecting the area, such as a pan under the machine with a drain, shutoff valves that are easy to reach and flooring that resists water. Ask your insurer what they recommend, as policies and expectations differ.

Check the plumbing that is already there. In older homes, supply lines and drains may be worn, and a renovation that opens the wall is a good time to look at them. Ask what condition they are in and whether any updates are advisable. If something is found, the work pauses and the issue comes to you as a written change order before it proceeds.

Water hammer and noisy pipes are also worth mentioning. When a washing machine valve closes, the water in the line can slam to a stop and produce a knocking sound in the wall. A plumber can tell you whether your system has features to calm this, and whether any are advisable when the wall is open. Quiet plumbing is a comfort, especially when the laundry room shares a wall with a bedroom.

Venting and moisture

A dryer pushes warm, moist, lint filled air out of the home through a vent duct. The length and path of the duct affect how well the dryer works and how much lint builds up, and a poorly planned duct can be a problem for efficiency and safety. Ask your contractor how the vent will be routed in your room, where it will exit and who will install it.

Requirements for dryer venting vary by city and building, and condos may have their own rules about penetrations through exterior walls and roofs. Ask your city building department and your association what applies, and share the answers with your contractor. Avoid assumptions based on what a neighbor did, since conditions differ.

Moisture is a bigger issue in a laundry room in a humid climate. Steam from washing and drying adds to the load on the air conditioning, and a closed room can develop odors or mildew. The guide to humidity and your renovation explains why, and the page on poor ventilation in bathrooms describes similar issues that apply to laundry rooms too.

Electrical needs and lighting

Washers, dryers, irons, steamers and other equipment draw power, and some need dedicated circuits. Whether your home has what is needed depends on its age and on how it was wired. Ask your contractor and a specialist electrician about capacity, and about whether the dryer is electric or gas, since that affects the connections.

Lighting makes a big difference in a working room. A bright, even ceiling light helps you see stains and check colors, and task lighting above the folding area helps with detail. Under cabinet lights can brighten counters without glare. The guide to interior lighting layers explains how to combine them.

Plan outlets for small appliances and for a charging spot if the room doubles as a mud room. Think about switches too: a light that comes on when you open the door is convenient when your hands are full. Any electrical work should be planned with your city's requirements in mind, and done by qualified people.

Floors, walls and surfaces that can take it

Laundry rooms need surfaces that handle water, heat and wear. Tile and some vinyl products handle moisture well, while certain wood products may not. Ask your contractor which flooring suits a room that may see spills or leaks. The pages on tile flooring installation and choosing tile for Florida homes explain some options.

Preparation matters. A floor that is not level can make machines vibrate, and a subfloor with soft spots may not support the weight of a full washer. Ask about the condition of the floor under the room, and whether repairs are needed. The page on subfloor repair and leveling describes why this is important.

For walls, choose a paint that wipes clean and resists moisture. A semi gloss or satin finish is often used for easier cleaning, though your choice depends on taste and on surface preparation. Behind and around machines, consider a surface that can be wiped and that will not swell if splashed.

Storage that keeps supplies tidy

Laundry supplies add up: detergent, softener, stain removers, dryer sheets, spare bulbs, lint brushes and cleaning cloths. Closed cabinets above the machines keep these out of sight and out of reach of children, while open shelves are handy for items used daily. A cabinet with a pull out shelf or a rolling cart can be useful in a narrow space.

Think vertically. Wall mounted cabinets, tall units beside the machines and shelves over the door use space that would otherwise go unused. Consider a fold down ironing board, a built in drying rack or a rod for hanging items. The page on closet and storage build outs and the closet design guide have related ideas.

If the room also serves as a mud room, add hooks, a bench and cubbies for shoes and bags. These small additions turn a laundry room into a landing zone that keeps the rest of the house tidy. Choose finishes that can handle wet items and sandy shoes, which are common in South Florida.

A small sink with a faucet is a surprisingly handy addition if the room has space and the plumbing is nearby. It is useful for rinsing, hand washing delicate items, cleaning brushes and filling buckets. Ask your contractor about the drain and the supply, since adding a sink is more involved than adding a shelf, and about a cabinet and countertop that can hold it neatly.

Comfort, access and aging in place

Think about how the room will serve you in the long run. Front loading machines raised on pedestals reduce bending, and counters at a comfortable height make folding easier. Wide doorways and clear floor space help anyone using a walker or wheelchair. These features are useful for everyone, not only for people with mobility needs.

Handles, switches and storage should be within comfortable reach. Lever style handles are easier on hands than round knobs, and shelves that are neither too high nor too low reduce strain. The guide to accessible home features and the page on aging in place remodeling offer further ideas.

Noise and heat also affect comfort. A laundry room near bedrooms may need sound control, and a small room with a dryer can get hot. Ask about insulation, door choices and ventilation that balance these concerns, and about how the air conditioning will serve the room.

Think about the day to day habits that keep a laundry room healthy. Cleaning the lint trap, wiping the door seal on a front loading washer and leaving the door ajar between loads reduce odors and mildew in humid weather. Plan for easy reach to the places that need regular attention, such as the back of the dryer and the vent connection, so that upkeep is something you will actually do.

Plan the project and the order of work

A laundry room renovation usually involves several trades: plumbing, electrical, carpentry, flooring and painting, and sometimes mechanical work for venting. The sequence matters. Rough work happens before walls are closed, finishes follow, and machines are connected near the end. The guide to renovation sequence explains why.

Think about where you will do laundry during the project. If the room is out of service, you may need to use a laundromat or a temporary arrangement for a period of time. Ask your contractor how long the machines will be unavailable, and plan accordingly. Asking about timing is a question, not a promise, as materials and trades vary. A temporary setup might be as simple as a plan with a nearby laundromat or a relative, or as involved as a hookup elsewhere in the house, so decide early which suits your household and tell your contractor so the sequence can be arranged around it.

Selections and orders also influence the schedule. Cabinets, countertops and machines may need to be chosen and ordered ahead. The pages on selecting fixtures and finishes and lead times and ordering help you prepare.

How we approach a laundry room project

Every project begins with a walkthrough and a written scope that lists what is included and what is not. For a laundry room, that includes plumbing connections, venting, electrical, flooring, cabinets and finishes, along with who handles each. A fixed price is set against the written scope before work begins.

Permits are pulled where the work requires them and inspections are scheduled. Core trades are in house, and specialist work such as some electrical or mechanical work is done by a specialist trade under the company's coordination. You have one point of contact from estimate to punch list.

If something turns up behind a wall, the work pauses and the issue comes to you as a written change order with a price before it proceeds. The site is cleaned at the end of each working day, and the punch list is walked together before final payment.

Common questions

Where should a laundry room go?

Somewhere that shortens the trip with clothes and works with your existing plumbing, electrical and venting. Near bedrooms is convenient, near an exterior wall helps with venting. Ask your contractor what each option would involve before you decide, and ask your association if you live in a condo.

Can I stack my washer and dryer?

Often yes, if the machines are designed for it and the space is narrow. Stacking saves floor space but places controls at different heights. Check the manufacturer's information and ask your contractor about the layout, the venting and the structure, as well as who in the household will use the machines.

How do I protect my home from washing machine leaks?

Ask your contractor about water resistant flooring, a pan with a drain under the machine and shutoff valves that are easy to reach. Discuss options with your insurer as well. In upper floors and condos, a leak can affect others, so planning ahead is especially worthwhile.

Do I need to change my dryer vent during a renovation?

Possibly. The length, route and exit of the vent affect performance and safety, and requirements vary by city and building. Ask your contractor to look at the current vent, and ask your city and your association what applies before any new penetrations or changes are made.

What flooring works in a laundry room?

Materials that handle water and wear, such as tile and some vinyl products, are common choices. The floor must be level and solid beneath the machines. Ask your contractor which products suit your room and what preparation they need, and check the condition of the subfloor first.

How long will I be without a washer and dryer?

It depends on the scope, the trades and the products involved, so ask your contractor for the sequence and for the point in it when the machines come out and go back. Plan for a temporary arrangement, and ask what could change the timing.

Want this priced properly? Start with a walkthrough.

Call (954) 331-7392

Related pages

Tap to Call , (954) 331-7392