Home · Planning · Window and Door Planning Checklist for Homeowners

Window and door planning checklist: measurements, styles, hardware and permits

Replacing windows and doors changes how a home looks, sounds and handles weather, and nearly every choice is hard to undo once the openings are cut. This checklist covers what to measure, choose and ask before an order is placed.

Call (954) 331-7392
Bright kitchen with island and pendant lights
Design inspiration

Why openings deserve more planning than most upgrades

A window or a door is a hole in the envelope of your house that has been carefully engineered to keep weather out while letting light, air and people through. When it is replaced, the work touches the frame, the wall around it, the waterproofing details, the interior trim, the exterior finish and sometimes the structure above. That is a lot of surfaces for what looks like a single product.

Unlike paint or flooring, most openings cannot be adjusted after the fact. A window ordered a half inch too small leaves a gap that has to be filled. A door ordered with the wrong swing blocks a hallway. A glass type chosen for the wrong exposure makes a room hot. Planning before the order protects you from those errors, and it costs far less to think first than to reorder later.

Our team begins every project with a walkthrough and a written scope that says what is included and what is not. For openings, that scope should list each window and door by location, size, style, glass, finish and hardware, with a note on trim and finish work around it. This page helps you build that list before the conversation begins.

Walk the house and make an opening schedule

Start with a simple schedule. Walk through each room and note every window and door that may be replaced, plus the ones you are unsure about. Give each a name, such as front entry, kitchen sink window or primary bedroom slider, and note the room, the wall direction and anything about its current condition. Photographs help, both of the interior and of the exterior.

Next to each entry, write what you want to change. Perhaps the kitchen window should open more easily. Perhaps the living room slider should become a wider door, or the front entry needs a new look. Perhaps one window is too small for the room. These notes turn into scope lines. They also reveal where an opening change would require framing work rather than a simple swap.

Our renovation measurements checklist explains how to measure rooms and openings consistently. Use it for general measurements, but remember that final dimensions for ordering are normally verified by the installing team at the opening itself. Your own numbers are for planning and conversation, not for placing an order.

Measurements: what to take and what to leave to the installer

For each opening, record the width and height at several points, since older openings are rarely square. Note the narrowest measurement, the depth of the wall, and anything that sticks into the opening such as trim, a sill or a security bar. Record the height from the floor to the bottom of the opening, which matters for safety and for how the window looks from outside.

Also note what surrounds the opening. Is there a stucco finish on the outside? A drywall return inside? A plaster arch? Shutter tracks or hardware? Each one changes how the old unit comes out and how the new one goes in. If the surroundings are likely to be disturbed, the scope should say who repairs and finishes them.

Do not order from homeowner measurements. Final sizes depend on the product, the installation method and the condition of the opening, and the installer or supplier takes those measurements. Your job is to give a clear picture and to ask when the final measurement will be taken, who takes it and what happens if the opening proves different from expected.

  • Measure width and height at more than one point for each opening.
  • Note wall depth, sill condition and anything that projects into the opening.
  • Record the sill height from the finished floor.
  • Photograph the inside and outside of every opening.
  • Ask who takes the final measurements and when.

Window styles and how they operate

Window style decides ventilation, cleaning, egress and appearance. A single hung window opens at the bottom only, a double hung opens at both, a casement swings outward on a hinge, a slider moves sideways, and a fixed window does not open at all. Each has strengths. The comparison of single and double hung windows explains one of the most common choices.

Think about where each window sits and how you use it. Over a kitchen sink, a casement is easy to crank open. Next to a bed, a sliding window might suit tight furniture. In a hallway, a fixed window gives light without air. In a bedroom, check that at least one window meets whatever egress needs apply to your home. Egress rules vary by building and by city, so ask your city building department what applies.

Style also shapes the look from the street. Grid patterns, frame color and the proportion of glass to frame all affect curb appeal. Walk outside, look at the house from the road, and imagine each change. Consistency across the front of the house generally looks calmer than a mix of unrelated styles, unless you are deliberately making one window a feature.

Impact resistance, glass and the performance questions

In South Florida, many homeowners consider impact resistant windows and doors because of hurricane season. These products are built with laminated glass and reinforced frames to withstand flying debris. Our guide to impact window basics explains how they work, and the comparison of impact windows and shutters helps you weigh the two approaches.

Ask for the specification sheet for any product you consider and read what has been tested and what is approved for your location. Requirements for wind and impact performance depend on where the home is and how it was built, so confirm with your city building department and your insurer what applies to your property. Do not assume that a product is acceptable everywhere just because it is sold locally.

Glass choices also affect comfort. Tinted and coated glass reduces heat and glare, laminated glass reduces outside noise, and clear glass gives the brightest view. Think about which rooms face the afternoon sun and which are near a busy road. Ask how each glass option behaves in those conditions rather than choosing a single type for the whole house by default. Write the glass choice for each opening into the scope, so a bedroom facing the road and a hallway window are not treated as the same thing.

Doors: entry, sliding and French styles

Doors are used far more often than windows, so operation matters. For an entry, consider the swing, the threshold height, the lock hardware, any glass in or beside the door and how it looks from both sides. Our entry door replacement page explains the scope. If your door has trouble closing now, note exactly when and where it binds or lets in light, because a frame that has shifted needs a different fix than a worn weatherstrip, and your contractor will want to know before choosing a replacement.

For patio openings, the choice between a sliding door and a pair of French doors changes the room. Sliders save swing space and offer wide glass, while French doors open fully and feel more traditional. The comparison of sliding doors and French doors covers the practical differences, and it helps to picture the furniture and the traffic path on both sides of the opening before you choose.

Pay attention to thresholds, tracks and screens. A raised threshold can be a trip hazard, while a low profile track can collect water. If you plan to use the opening heavily, ask about the track materials and how the door is supported. For doors that stick or drag today, observe whether the problem is the track, the rollers or the frame itself, and tell your contractor what you saw, because the cause affects whether a replacement is the right answer and what else may need attention in the opening.

Hardware, locks, screens and the finishing details

Hardware is what you touch every day. Handles, locks, latches, cranks and tracks come in many finishes and quality levels. Decide on a consistent finish across the house, and ask whether locking hardware can be keyed alike for entry doors. Check that the lock style suits everyone who lives in the home, including children and older adults.

Screens and shades are often forgotten until the end. Ask whether screens are included, what type they are, and how they attach. If you plan blinds or shades, tell your contractor so that mounting depth and hardware clearance are considered. A deep window sill may allow an inside mount, while a shallow one may force an outside mount.

Colors and finishes on the frame should be chosen in daylight. Interior and exterior colors may differ, and dark exterior finishes can show heat and dust differently from light ones. Ask for a physical sample and view it against your wall color and trim. Also confirm what happens to the existing trim, and whether new trim and paint are part of the scope.

Permits, associations and insurer questions

Many window and door projects require a permit, but requirements vary by city and by the kind of work. Replacing like for like in an existing opening may be treated differently from enlarging or moving an opening. Ask your city building department what applies to your project, and ask your contractor who pulls the permit and schedules inspections. Our permits for home renovation guide explains the general process.

If you live in a condo, townhome or an HOA community, exterior changes are often controlled by the association. Color, style, hardware and even the type of glass may need approval before work starts. Ask your association for its rules in writing and submit your selections for approval before ordering. Our working with HOA and condo rules page lists the questions to ask.

Insurance is the third conversation. Some insurers consider the type of openings in a home when setting terms, and they may ask for documentation after installation. Ask your insurer what they need and keep the product specification sheets, permit records and final inspection paperwork together. This page offers no insurance advice; it simply suggests that the question be asked before work is done, not after.

Protecting the house while openings are exposed

Replacing an opening exposes the house for a period of time. Good planning limits that period and protects what is inside. Ask how the crew will secure and cover openings at the end of each day, how furniture near windows will be protected, and how dust from cutting or removal will be contained. The site is cleaned at the end of each working day, but you can still help by clearing the area.

Weather is a real factor in South Florida. Afternoon storms can arrive with little warning and summer humidity is constant. Ask how the schedule responds to rain and what temporary protection is used if a window must remain open overnight. During hurricane season, ask what the plan is if a storm is forecast while the work is under way, since open or half finished openings must be secured.

Also think about privacy and security. While a door is being replaced, the entry may be unlocked or temporarily blocked. Ask about alternatives for coming and going and plan for pets and children. Our preparing your home for contractors page lists practical steps for clearing space and protecting belongings before work begins.

Lead times, scheduling and the order of work

Windows and doors are often made to order, so lead times are a real part of the plan. The right question is how long, not whether. Ask for a lead time when you select each product, and ask what happens to the schedule if a delivery is late. Read lead times and ordering before you commit, and decide whether you want the openings done together or in phases.

Think about sequence. Interior painting, flooring and trim work are usually finished after windows and doors are in, because the installation disturbs walls and sills. If other renovation work is planned, the order matters. Our renovation sequence explained guide shows where openings usually fall in the overall plan.

If something found at the opening changes the plan, such as rot in the frame or damage in the wall, the work pauses and the finding comes to you as a written change order with a price before it proceeds. Ask what the likely extra items are for your type of opening so that the possibility is not a surprise. A good scope names them as possibilities rather than hiding them.

Pulling the checklist together

Use this sequence. First, make the opening schedule. Second, take planning measurements. Third, choose styles and operation. Fourth, decide glass and impact performance questions. Fifth, choose doors, thresholds and hardware. Sixth, settle screens, shades and finishes. Seventh, confirm permit, association and insurer requirements. Eighth, plan protection, lead times and sequence.

Keep everything on one sheet: location, size, style, glass, finish, hardware, supplier, specification document and approval date. Share it with your single point of contact, and update it if anything changes. When the punch list is walked together before final payment, the sheet lets you confirm with a glance that what was installed matches what you chose. It also gives you a record to hand to a future owner, an insurer or an association, which is useful long after the dust has settled and the receipts have been filed away. Add the product specification documents, the permit paperwork if any, and photographs of each finished opening, so that the file is complete in one place.

For the broader service picture, see impact windows and doors for how this work is organized, and consider reading the hurricane season renovation planning guide to think about timing. A little preparation here makes the first conversation with a contractor far more productive.

Finally, give yourself permission to decide in rounds. Many homeowners find it easier to settle the entry door and the largest glass openings first, since those shape the look of the whole house, and then to work through the smaller windows once the overall direction is clear. Whatever order you choose, keep the schedule sheet current and ask every question on this page out loud, so that nothing important lives only in someone's memory.

Common questions

Should I measure my own windows before calling a contractor?

Rough measurements are useful for planning and conversation, but they should not be used for ordering. The installing team or supplier verifies final sizes at the opening, because older openings are rarely square. Take notes and photographs, then ask who measures and when so the order matches the real opening.

Do I need a permit to replace windows or doors?

Requirements vary by city and by the kind of work. Replacing in an existing opening may be treated differently from enlarging or moving one. Ask your city building department what applies, and ask your contractor who pulls the permit and schedules inspections so the process is clear from the start.

How do I know if a window suits my location?

Ask for the specification sheet and read what has been tested and approved for your area. Requirements depend on where the home is and how it was built, so confirm with your city building department and your insurer. Do not assume a product is acceptable everywhere just because it is sold locally.

What should I ask my HOA or condo association?

Ask for the written rules on exterior changes, including color, style, hardware, glass type and the approval process. Find out whether you must submit drawings or samples before ordering. Approval before ordering avoids the expensive problem of an installed product that the association later rejects.

How are openings protected if weather arrives mid project?

Ask before work begins. A good plan covers how openings are secured at the end of each day, what temporary protection is used for rain, and what happens if a storm is forecast during hurricane season. The schedule should include a clear response so open or half finished openings are never left unprotected.

What if the opening is damaged once the old unit is removed?

The work pauses and the finding comes to you as a written change order with a price before it proceeds. You approve or decline it. Ask your contractor in advance what kinds of hidden damage are common for your type of opening, so the possibility is discussed rather than discovered later.

Want this priced properly? Start with a walkthrough.

Call (954) 331-7392
Tap to Call , (954) 331-7392