Home · Services · Roof replacement planning and the written scope

Roof replacement planning from material to written scope

Replacing a roof is one of the largest decisions a homeowner makes. This page walks through materials, underlayment, decking, permits and the written scope, so you can compare proposals and ask better questions.

Call (954) 331-7392
Bathroom with marble-look tile, warm wood vanity and gold fixtures
Design inspiration

Is it time? Questions before the decision

Nobody wants to replace a roof early, and nobody wants to replace one late. The honest way to decide is to gather information instead of relying on a feeling. How has the roof performed through recent storms? Are leaks appearing in more than one place? Are repairs becoming frequent? Is the material visibly worn, cracked, curled, loose or shedding? Each of these answers tells part of the story.

Age is a clue, but it is not a verdict. A roof installed with care and maintained well can outlast a roof installed poorly on the same house. A professional inspection looks at the surface, the flashing, the vents, the edges and, where it can be reached safely, the underside and the attic. The result should be a plain description of condition, backed by photographs, not a sales pitch.

If an inspection shows that the roof is mostly sound with a few defects, a repair may serve you well, and our page on roof repair services explains how that is scoped. If the findings show widespread wear or repeated failure, replacement planning begins. The rest of this page assumes you have reached that point and want to approach it calmly.

One more thing to consider early is whether other work on the house should happen first or alongside. Rot at the eaves, damaged stucco near the roofline and old rooftop equipment all affect a replacement. It is far easier to deal with them while scaffolding is up and the roof is open than to return later and disturb brand new work. Mention anything you suspect during the first walkthrough so it can be looked at together.

Choosing a material for a South Florida home

Roofing materials in this region fall into a few families. Asphalt shingles are common because they are familiar and widely available. Tile roofs, in clay or concrete forms, are a long established look in warm climates. Metal roofs, in panels or shingle style pieces, are chosen for their profile and their behavior in wind and rain. Low slope and flat areas use membrane systems that are completely different from sloped materials.

No material is right for every house. The shape of the roof, the structure beneath it, the surrounding trees, the closeness to salt air, the appearance you want and the rules of your community all feed the choice. Weight matters because heavier materials ask more of the structure. Appearance matters because the roof is the largest visible surface of the house.

Our guide to roof types for South Florida introduces each family, and the comparison of shingle, tile and metal roofs sets them side by side. Use them to build vocabulary, then ask your contractor which they would recommend for your house and why. The reasoning matters more than the answer.

Two practical points are worth raising before you fall in love with a material. First, ask what the structure beneath it is designed to carry, since some materials are much heavier than others and a change from one type to another can raise questions about framing. Second, ask how the material is attached and how that affects its behavior in strong wind. These are questions for a roofing professional, and a thoughtful one welcomes them.

The layers beneath what you can see

Most of what keeps water out of a house is never seen once the job is done. The roof deck is the structural surface, typically plywood or boards, fixed to the rafters or trusses. Above it sits the underlayment, a water resistant layer that works as a second line of defense if the visible roofing is breached. Above that sits the roofing material itself.

Different underlayments exist, from felt style papers to synthetic sheets to self adhering membranes that stick to the deck. They differ in how they handle heat, how long they can sit exposed during construction and how they seal around fasteners. The choice should be named in the written scope, together with where each type is used, such as extra protection in valleys or around penetrations.

Ask what happens to the old layers. Some projects strip everything to the deck and start over, which allows inspection of every inch. Others may overlay in certain situations, depending on the material and local requirements. A tear off lets the contractor see the condition of the deck and replace any damaged portions, which is why it is such a common approach. Whatever the plan, it should be written down.

Color and finish are the last visible choices, but they have practical effects. Lighter colors reflect more of the sun's heat, while darker colors absorb it, and the look should also suit the walls, the trim and the neighborhood. Ask to see a full sample outdoors in natural light, not just a small chip indoors. A sample held against your actual stucco or siding tells you far more than a catalog photograph.

  • The deck: the structural surface that carries everything above it.
  • The underlayment: the water resistant layer under visible roofing.
  • The roofing material: shingles, tile, metal or a membrane system.
  • Flashing and edge metal: the parts that steer water at joints and borders.
  • Ventilation components: the intake and exhaust paths for the attic space.

Decking: the line item nobody wants to find

Decking is the biggest unknown in a roof replacement. Until the old roofing comes off, nobody can see all of it. Soft spots, stains, rot and old repairs may be hiding under an otherwise healthy looking surface. The scope should say what is assumed, how damaged decking will be handled and how it will be priced if found.

In our process, anything found behind or beneath the visible surface pauses the work and comes to the homeowner as a written change order with a price before it proceeds. For roofing this usually means photographs of the damaged areas, a description of the replacement and a clear unit for pricing. You approve, and the work continues. You never discover a new charge at the end.

It is worth asking how the contractor will keep the house dry during the tear off. Work is normally done in sections so that each area is closed in before the day ends. Ask about tarps, weather monitoring and what happens when a storm cell approaches. Ask to see an example of how such a change is written before you sign.

Flashing, vents and the details that decide longevity

Roofs do not usually fail across the field of the material. They fail at details. A plan for replacement should address every place the roof meets something else: walls, chimneys, skylights, pipes, vents and edges. Old flashing is often reused to save effort, but on many projects it makes sense to replace it so the new roofing and the new metal wear together.

Ask your contractor to point out each flashing location on the existing roof before work begins, and to note which ones will be replaced. A short walk around the house with a pencil and a sketch of the roof, marking walls, vents and valleys, turns an abstract promise into something you can check later. It also gives you a way to confirm, at the final walkthrough, that each marked place was handled as agreed.

Ventilation deserves attention. An attic that traps heat and moisture ages the roof from below and raises humidity inside the house. The scope should describe the intake and exhaust paths that will exist after the work, and whether any changes are being made. If the contractor says the existing ventilation is fine, ask what that conclusion is based on.

Edge details at eaves and rakes also matter, particularly in areas with strong wind. How the edge metal is fixed and how the roofing terminates at the edge are details a good scope states. Related work such as soffit and fascia repair is easiest to coordinate before the new roof is complete, since the edges are exposed and accessible.

Permits, inspections and what to ask your city

Roof replacement is regulated work in most places, and requirements are set by your city or county building department. The details vary: what must be submitted, what inspections occur, what documentation is needed, and who is allowed to apply. We do not state those rules here because they differ between cities and change over time. Your building department can tell you what applies to your address.

What you can ask your contractor is who pulls the permit, whether the cost is included in the scope, which inspections are expected and how they will be scheduled. Permits are pulled where the work requires them, inspections are scheduled, and the inspection results are shared with you. The planning page permit questions to ask your city helps you prepare.

If you live in a community with an association, check whether roof color, material or style needs approval before the order is placed. Some communities require an application and a waiting period. Starting that conversation early prevents a long delay between a signed scope and the first day of work.

Neighbors and shared spaces can matter as well. If your home is a townhome or part of a group of attached buildings, a roof replacement may involve a neighboring section, shared walls or a common structure. Ask your association who is responsible for what, and tell your contractor what you learn so that the written scope reflects the limits of the work and does not promise anything that is not yours to change.

Hurricane season and the calendar

Timing a roof replacement in South Florida means thinking about weather in a serious way. A house with an open roof during a tropical system is a house at risk. Many homeowners aim for the quieter months, but supply, demand and your own schedule may push the calendar. Whatever the time of year, the plan should say how the roof will be dried in each day and what the contractor does when a storm is forecast.

Materials also have lead times, and they vary. Rather than assuming a number, ask your contractor how long your chosen material takes to arrive and what happens to the schedule if it is late. The guide on renovating around hurricane season and the planning page on schedule and lead time planning help you shape realistic expectations.

Plan for the rest of the household too. Roof work is loud, begins early and involves people moving above your head. Pets may be stressed, work from home may be difficult and driveways may be blocked. Tell your project contact what matters to you, and they can sequence the work, stage materials and protect landscaping accordingly.

Insurance conversations and documentation

Roof replacement often brings up insurance, particularly after storm damage or when a policy has requirements about roof age or condition. We cannot give insurance or legal advice, and we would encourage you to speak directly with your insurer or agent about what they require, what documentation they need and how they evaluate roofing work.

What we can do is document. Before work, photographs show the existing condition. During work, photographs show the deck, the underlayment and flashing before they are covered. After work, you receive a written record of what was installed. Having this ready makes any conversation with your insurer easier, and it makes your own records more useful when you sell or refinance.

Our planning page on preparing for insurance conversations offers a way to organize questions and paperwork before you talk to anyone. Keep copies of the scope, change orders, product information and inspection results together in one place.

Ask your contractor for the product information sheets for the underlayment, the roofing and the flashing, and keep them with the rest of your home records. If you sell the house, a buyer or an inspector may want to see them. If a storm tests the roof, they help everyone talk about the same materials. A tidy folder, paper or digital, costs nothing to maintain and is the sort of record people wish they had when a question comes up years later.

What a written roofing scope should include

A strong roofing scope reads like a plan, not a slogan. It names the roof areas included, the tear off method, the deck repair approach and pricing basis, the underlayment type, the roofing material and color, the flashing and edge metal, the ventilation components and the cleanup plan. It states who obtains permits and which inspections are expected.

It also lists what is not included, such as gutters, fascia repair, interior damage, solar equipment removal or satellite dishes. Exclusions are not a trick; they are honesty. Every line that is not clear becomes a place for a later disagreement, so the more specific the document, the safer you are. Our guide to reading a written scope explains how to spot vague wording.

When you collect more than one proposal, compare them line by line, not by the bottom number. Two proposals that look different may simply be describing different amounts of work. The page on comparing renovation estimates shows how to do it fairly, and the checklist in roof project planning gives you a ready set of questions.

The job itself, cleanup and the final walkthrough

On a well run roofing job, the site is cleaned at the end of each working day. Magnets are used for nails, debris is removed, and landscaping and walkways are protected. Ask where materials will be stored and where the dumpster will sit. Ask how air conditioning units, pool equipment and cars should be protected.

One point of contact from estimate to punch list means you know who to call when something comes up. They can tell you what happened today and what is planned tomorrow. For a project of this size, a short daily conversation reduces anxiety and misunderstanding.

At completion, you walk the property together. You look at the roof from the ground, check the gutters and edges for debris, go over the photographs and walk through the punch list before final payment. Questions should be answered in plain language. Homeowners in communities such as Boca Raton and Weston will find the same steps apply, and our overview of exterior and roofing work shows how replacement fits among related projects.

Common questions

How do I know a roof needs full replacement?

Look for widespread wear, repeated leaks in different places, loose or cracked material across large areas and soft decking. A professional inspection with photographs should describe the condition plainly. If the roof is mostly sound with limited defects, repair may serve better, so ask for both options to be explained.

What is underlayment and why does it matter?

Underlayment is a water resistant layer between the deck and the visible roofing. It acts as a second line of defense if the surface is breached by wind or damage. The written scope should name the type used and where extra protection is added, such as valleys and penetrations.

What happens if rotted decking is found?

Work pauses, you see photographs and a written change order with a price, and decking is replaced after you approve. Because decking is hidden until the old roofing is removed, ask in advance how it will be handled and priced so nothing is a surprise.

Who arranges the permit for a roof replacement?

This should be stated in the written scope. Permits are pulled where the work requires them and inspections are scheduled. Requirements vary by city, so ask your city building department what applies to your address and confirm with your contractor who handles each step.

Does my association need to approve the new roof?

Possibly. Many communities have rules about material, color and style, and some require an application before an order is placed. Ask your association early, because approval can take time and the answer may affect which materials you can choose.

Can I stay in the house during a roof replacement?

Usually yes, but expect noise, early starts, vibration and blocked driveways. Tell your project contact about pets, work from home needs and any health concerns. The site is cleaned each working day, and the schedule can be arranged around what matters most to your household.

Want this priced properly? Start with a walkthrough.

Call (954) 331-7392
Tap to Call , (954) 331-7392