Wood in a climate that never really dries out
Hardwood has a warm look that many homeowners want, and it can work well in a South Florida home. But wood takes on and releases moisture as the air changes, and our air carries a lot of it. Boards swell a little in humid months and shrink a little when air conditioning runs hard or when a dry spell arrives. The art of installing hardwood here is planning for that movement instead of pretending it will not happen.
That planning starts long before the boards arrive. The condition of the subfloor, the way the house is cooled, the type of wood, the width of the boards and the method of fastening all affect how a floor behaves over time. A wide board that looks lovely in a showroom may cup or gap in a house where the air conditioning is turned off for weeks at a time.
This is not a reason to avoid hardwood. It is a reason to ask better questions at the start. If you are weighing all your flooring choices, our overview of flooring installation shows how each material compares, and the rest of this page focuses on wood.
Throughout, remember that every home is different. A condo on an upper floor, a slab home near the water and an older house with a raised floor each present their own conditions, and a walkthrough is the only way to know which applies to yours.
Solid hardwood and engineered hardwood
Solid hardwood is a single piece of wood milled into a board, usually with tongue and groove edges. It can be sanded and refinished several times because the wear layer is the entire thickness above the groove. It is typically nailed or stapled to a wood subfloor, which makes it a poor match for many concrete slabs without extra layers.
Engineered hardwood has a real wood top layer bonded to a core made of plywood or other layered material. The layers run in different directions, which makes the board more stable when humidity shifts. Many engineered products can be glued, floated or, in some cases, nailed, so they suit a wider range of subfloors, including concrete. The thickness of the top layer decides how many times it can be refinished.
Neither choice is better in every case. Solid wood offers the longest life when it is on the right subfloor and kept in a stable environment. Engineered wood handles movement more calmly and suits slabs and upper floors. Our hardwood vs engineered wood guide goes deeper, and our side by side comparison lays out the tradeoffs.
Ask the supplier for installation instructions for the exact product before you commit. Those instructions name the subfloor types, moisture limits and fastening methods the maker supports.
Reading your subfloor before you choose
The subfloor decides which wood and which method are possible. A plywood or board subfloor over joists accepts nails and staples. A concrete slab does not, and usually needs a glued or floated system, often with a moisture barrier. A floor above another living space may carry sound rules from an association, which can add a required underlayment.
Flatness matters as much as material. Wood flooring wants a subfloor that is flat within the tolerance the maker lists, measured with a straightedge. High spots can be ground down, and low spots can be filled with a leveling product, but the work has to be planned and priced before installation. Our page on subfloor repair and leveling explains how soft or uneven areas are found.
Moisture in the subfloor is the item to take seriously. A slab can release water vapor for a long time, and a floor installed over it without testing can cup, buckle or stain. Ask whether moisture testing is part of the scope, which method will be used and what happens if the readings are too high.
Older homes may hide further surprises: patched sections, former plumbing cut outs, or layers of previous flooring. These come out during the walkthrough or during demolition, and any added work comes to you as a written change order with a price.
- Identify the subfloor type: plywood, board, concrete slab or something else.
- Check flatness with a long straightedge and mark high and low areas.
- Ask whether moisture testing is included and how results are handled.
- Confirm whether an underlayment or sound layer is required by your association.
Acclimation: the question to ask, not a number to memorize
Acclimation means letting wood adjust to the conditions of the home before it is fastened down. You will hear different advice about how long it takes, and the right answer depends on the product, the supplier's instructions and the conditions in your house. Rather than rely on a rule of thumb, ask for the maker's written guidance and ask how it will be followed on your job.
What matters is the environment while the wood waits. If the house is not yet cooled to normal living conditions, or if the slab is still releasing moisture, boards stacked in a room will take on that moisture and then shrink later when the house is lived in. That is how gaps appear in the first dry season after installation.
A sensible plan is to have the air conditioning running as it will when you live there, to store boards in the room where they will be installed, and to keep them off the floor and out of the weather. Check that other wet trades, such as plaster, paint or tile work, are finished or well under way so they do not add moisture while the wood waits. It also helps to keep a simple written log of when the boards arrived, where they were stored and what the air conditioning was doing, so that everyone can point to the same facts later if a question comes up about how the floor is behaving.
If the schedule gets tight, resist the urge to shorten this step. It is one of the least costly ways to protect the floor, and it takes only planning.
Humidity control after the floor is down
A hardwood floor lives with the house for years after the installers leave. The biggest factor in how it ages is steady indoor air. Constant cooling and a normal range of humidity keeps boards stable, while turning off the air during an extended trip lets moisture rise and the wood swell.
This is common in South Florida, where many homeowners are away for part of the year. If you travel, ask your contractor and the flooring maker how to keep conditions steady while the home is empty. A dehumidifier, an air conditioner set at a reasonable level, or a smart monitor can all help, depending on the house. Our guide on humidity and your renovation covers this topic more broadly.
Water is the other enemy. A leaking dishwasher, a pet bowl that spills often, or a slab that weeps can all damage wood. Mats at entry doors and under sinks, and prompt cleaning of spills, help. If water does reach the floor, call a professional rather than waiting, since swelling may need to be assessed and the source corrected.
These habits are small, but they do more for the life of a floor than any finish.
Ask also about the air handling in your building. In some condos and townhomes the air conditioning cycles on a schedule, and a unit that sits closed for part of the year may see large swings in humidity. A simple humidity meter placed in the room costs little and tells you far more than guessing, and you can share its readings with the flooring maker if a question ever comes up.
Board width, grain and the look you want
Narrow boards read as classic and stay calm in humid conditions because each board has less width in which to move. Wide planks give a modern, open feel but can show more gap and cup when humidity changes. Engineered wide planks tend to behave better than solid wide planks because of their layered construction.
Species and grain affect the look. Some woods are harder and resist dents, while softer species show marks more easily, which some people enjoy as character. Color and grain can range from calm and uniform to strongly figured. View real samples in the room where they will be installed, in morning and evening light, before choosing.
Finish choices matter too. A factory finish is applied before the boards arrive and is usually durable, with small beveled edges between boards. A site finished floor is sanded flat after installation and coated, giving a smooth, continuous surface. Sanding on site creates dust and needs care, so discuss how it will be contained.
Our flooring selections checklist helps you work through species, width, finish and sample approvals in a sensible order.
Installation methods and what they mean for you
Nail down installation fastens boards through the tongue into a wood subfloor, and it gives a solid feel underfoot. Glue down installation bonds boards to the subfloor with adhesive, which suits slabs and can reduce hollow sounds. Floating installation joins boards to each other without fastening them to the subfloor, and it sits on an underlayment.
Each method has its place. A glued floor can be quieter but is harder to remove later. A floating floor goes in with less prep but can feel less solid, and needs gaps at the walls. A nailed floor feels traditional but is limited to certain subfloors. Your contractor should explain why a method suits your house and the product you chose.
Expansion gaps at walls and fixed objects, such as cabinets, fireplaces or stair openings, are part of every method. Trim, baseboard and thresholds cover them. If you plan to add trim or replace baseboards, include that in the scope so the floor edge is finished neatly. Baseboards that were painted in place often have to be removed and reset, and wall paint may need a touch up afterward, so decide who handles that and when. Our interior doors and trim page explains how that work fits in.
Doorways and transitions are another detail. When wood meets tile or carpet, the heights may differ, and a plan for each doorway avoids trip hazards. Walk each doorway with your contractor and agree on the type of threshold, its color and where it will sit, because those small pieces are seen from every room.
Stairs, rooms and the flow between spaces
Hardwood in one room often leads to questions about the next. Running the same floor through connected rooms makes a small home feel larger, but it affects cost, timing and the amount of furniture that has to move. Decide early whether to carry it through or end it at a defined point, such as a doorway.
Direction of the boards is a design choice. Running boards along the longest line of the room or toward the main light source often looks natural, while a diagonal pattern adds interest but uses more material. Layout should be shown to you on paper or marked in the room before installation.
Stairs deserve their own plan. Treads, risers and nosing need to match the floor at the top and bottom in height and look, which is a detail to settle before ordering. Our stair flooring and railing updates page explains the pieces and safety planning.
If a squeaky floor is the reason you are replacing wood, consider whether the cause is the subfloor. Our page on squeaky and uneven floors describes what to observe and what to tell a professional.
Protecting wood during construction
Hardwood is often among the last things installed because it is easy to damage. Other trades bring ladders, tools, paint and drywall dust, all of which can scratch or stain a new floor. The order of work should place wood after messy trades, and the floor should be covered once it is down.
Coverings must be chosen with care. Plastic sheeting can trap moisture and cause problems, while breathable protection board or paper allows the wood to settle. Heavy items can dent a finish even through a covering, so plan paths for appliances and furniture. Our guide to protecting floors during construction lists practical steps.
If you are living in the home during work, expect dust. Containment and daily cleaning reduce it, and our site is cleaned at the end of each working day. Sanding is the dustiest stage and needs the most attention.
Finally, think about pets and children. A site finished floor needs time to cure before heavy traffic, and the maker's instructions should tell you when you can move furniture back.
How the project runs from estimate to punch list
Every project starts with a walkthrough and a written scope, and a fixed price is set against that scope before work begins. For flooring, the scope should list the product, the subfloor prep, the removal of existing flooring, the transitions, the trim and the cleanup. Permits are pulled where the work requires them, and requirements vary by city and building.
If you live in a condo or townhome, ask your association about floor underlayment, sound rules, delivery hours and elevator use before scheduling. These rules vary by community, and getting approval in writing prevents delays.
If something is found under the old floor, such as damaged subfloor, old adhesive or moisture, work pauses and a written change order with a price comes to you before it proceeds. Our explanation of change orders shows what to expect.
You will have one point of contact from estimate to punch list, and the punch list is walked together before final payment. This page is general guidance for homeowners in areas such as Weston and Davie, and does not claim past work in any particular place.
Common questions
Can hardwood be installed over a concrete slab?
Often yes, but usually with an engineered product that is glued or floated, and with moisture testing and a barrier where the maker requires it. Solid wood is generally nailed to wood subfloors. Ask for the written instructions for your specific product and slab, and ask who is responsible if readings are too high.
How long does wood need to acclimate?
There is no single answer. It depends on the product, the maker's written instructions and the conditions in your home. The air conditioning should be running as normal, and the boards stored in the room where they will be installed. Ask your contractor to show you the instructions that apply to your boards.
Will gaps appear between boards in South Florida?
Small seasonal gaps can show up in solid wood when indoor air gets drier, and boards may swell in humid periods. Steady cooling and humidity control reduce movement. Narrower boards and engineered products usually move less. Discuss realistic expectations for your chosen species and width before you buy.
Is engineered hardwood real wood?
Yes, the top layer is real wood, bonded to a layered core. The thickness of that top layer decides how many times it can be sanded. Ask for the wear layer thickness in the product details and what refinishing, if any, is supported by the maker for your floor.
Do I need to move out during installation?
Not always, but you will need to clear rooms and plan for noise, dust and limited access, especially during sanding and finishing. Talk through your daily routine, pets and any health concerns at the walkthrough, so the work can be sequenced sensibly and areas can be protected.
What should be in a written scope for a hardwood floor?
It should name the product, the area, the existing floor removal, subfloor prep and moisture testing, the installation method, transitions, trim and finishing, and the cleanup. It should also say what is not included. If something is unclear, ask for it in writing before the price is fixed.


